ASME A112.19.14 pdf download
ASME A112.19.14 pdf download Six-Liter Water Closets Equipped With a Dual Flushing Device (c) 0.34 oz (10 mL) of this solution shall be removed from the bowl and shall be added to 5.75 oz (170 mL) of clean water in a suitable container (i.e., dilution ratio of 17:1). A sample of this solution shall be set aside in a test...
ASME A112.19.17 pdf download
ASME A112.19.17 pdf download MANUFACTURED SAFETYVACUUM RELEASE SYSTEMS(8VRS) FOR RESIDENTIAL ANDCOMMERCIAL SWIMMING POOL,SPA, HOT TUB, AND WADINGPOOL SUCTION SYSTEMS Safety Vacuum Release System: a system or device capableof providing vacuum release at a suction outlet causedby a high vacuum occurrence due to a suction outletflow blockage, by either venting the circulation systemto atmosphere, turning off the circulating pump, orreversing circulating...
ASME A112.19.19 pdf download
ASME A112.19.19 pdf download Vitreous China Nonwater Urinals 6 URINAL TESTS 6.1 General This section presents test methods and performance requirements for all nonwater urinals. 6.2 Selection of Test Urinal and General Instructions 6.2.1 The manufacturer shall provide three sam- ples of the urinal model to be tested. One sample shall be chosen at random by laboratory personnel and tested...
ASME B16.9 pdf download
ASME B16.9 pdf download Factory-Made Wrought Buttwelding Fittings 1 SCOPE1.1 General This Standard covers overall dimensions, tolerances,ratings, testing,and markings for factory-made wrought buttwelding fittings in sizes NPS h throughNPS 48 (DN 15 through DN 1200). 1.2 Special Fittings Fittings may be made to special dimensions, sizes,shapes,and tolerances by agreement between the man-ufacturer and the purchaser. 1.3 Fabricated Fittings Fabricated laterals...
ASME B16.10 pdf download
ASME B16.10 pdf download FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES 1.5.1 Gate，Globe，Angle,Check，Plug, andBall Valves (a)Class 150 _-Tables 1 and A1(b)Class 300 – Tables 2 and A2(c)Class 600 Tables 3 and A3(d)Class 900- Tables 4 and A4(e) Class 1500—Tables 5 and A5f)Class 2500 -Tables 6 and A6 1.5.2 Y-Pattern Globe and Y-Pattern SwingCheck Valves Class 150 — Tables 1 and Al...
ASME B16.11 pdf download
ASME B16.11 pdf download Forged Fittings, Socket-Welding and Threaded 1 SCOPE AND GENERAL 1.1 Scope This Standard covers ratings, dimensions, tolerances, marking, and material requirements for forged fittings, both socket-welding and threaded, as illustrated in Tables 1 through 5 and Tables I-1 through I-5, inclusive. 1.1.1 Fitting Types/Configuration. Types of fittings covered by this Standard are shown in Table 6,...
ASME B16.14 pdf download
ASME B16.14 pdf download Ferrous Pipe Plugs, Bushings, and Locknuts With Pipe Threads 3 PRESSURE–TEMPERATURE RATINGS (a) Pressure–temperature ratings for plugs and bush- ings shall be in accordance with ASME B16.4 if made of cast iron, or ASME B16.3 if made of malleable iron, ductile iron, or steel. Use of cored plugs or hexagon head bushings should be limited to...
ASME B16.15 pdf download
ASME B16.15 pdf download Cast Copper Alloy Threaded Fittings Classes 125 and 250 6 THREADING 6.1 Types of Threads All pipe fittings shall be threaded with ANSI/ ASME B1.20.1 general purpose pipe threads and shall have taper threads, except wrought couplings (Tables 2 and I-2), wrought caps (Tables 3 and I-3), and wrought bushings (Tables 4 and I-4) in NPS...
ASME B16.18 pdf download
ASME B16.18 pdf download Cast Copper Alloy Solder Joint Pressure Fittings 6 MATERIAL (a) Castings intended for use in applications up to 400°F (204°C) shall be of a copper alloy produced to meet (1) the requirement of ASTM B62 Alloy C83600 (2) the tensile requirements of ASTM B584 Alloy C83800 or C84400 and in all other respects comply with the...
ASME B16.20 pdf download
ASME B16.20 pdf download Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed 2.7 Identification Number Dimensional reference identification numbers are assigned to ring-joint gaskets and shown in Tables 3 through 8 (Tables I-1, I-2, and I-3 of Mandatory Appendix I). 3 SPIRAL-WOUND GASKETS 3.1 Size and Class Spiral-wound gaskets, including centering ring and inner ring (paras. 3.2.4 and 3.2.5),...