ASME B89.1.5-1998 pdf download

ASME B89.1.5-1998 pdf download

ASME B89.1.5-1998 pdf download MEASUREMENT OF PLAIN EXTERNAL DIAMETERS FOR USE AS MASTER DIscS OR CYLINDRICAL PLUG GAGES 4REQUIREMENTs OF MASTER DIscs AND cYLINDRICAL PLUG GAGES 4.1 General The capability of measuring equipment and tech-niques to achieve a high order of precision in thecalibration of master discs or cylindrical plug gages isiimited by relevant features and conditions of the gageto...

ASME SEC 1 pdf download

ASME SEC 1 pdf download

ASME SEC 1 pdf download PART PVG REQUIREMENTS FOR ORGANIC FLUID VAPORIZERS GENERAL The rules in Part PVG are applicable to organic fluidvaporizers and parts thereof and shall be used in conjunc-tion with the general requirements in Part PG as well aswith the special requirements in the applicable Parts ofthis Section that apply to the method of fabrication used. MATERIALS...

ASME 2344-1 pdf download

ASME 2344-1 pdf download

ASME 2344-1 pdf download Case 2344-1 Use ofSand Cast Aluminum Alloy A356.0, T6 Temper, for the Manufacture of Hot Water Heating Boilers Under Part HC Section IV Inquiry: May aluminum alloy A356.0 sand castings in the T6 temper meeting the chemical composition and mechanical properties given in Tables 1 and 2 and other requirements ofASTM B 26/B 26M-97 be used...

ASME 14414 pdf download

ASME 14414 pdf download

ASME 14414 pdf download Pump system energy assessment 4.7.2? Assessment?scheduling The dates of the assessment, and dates and times of key meetings shall be designated in advance of beginning the assessment. The assessment meetings shall include: — kick-off meeting. It shall occur just prior to the commencement of the assessment. The purpose of this meeting is to review information to...

ASME A13.1 pdf download

ASME A13.1 pdf download

ASME A13.1 pdf download Scheme for the Identification of Piping Systems 1 OBJECT AND scOPE This Standard is intended to establish a common systemto assist in identification of hazardous materials conveyedin piping systems and the materials” hazards whenreleased in the environment. This scheme concerns identification of contents ofpiping systems. It is recommended for the identificationof piping systems used in industrial,...

ASME A17.4 pdf download

ASME A17.4 pdf download

ASME A17.4 pdf download Guide for Emergency Personnel (Includes Evacuation Procedures and Firefighters’ Service Operating Procedures) (4) A member of the rescue team should enter the elevator car and set the emergency stop switch, if the car is so equipped, in the “STOP” or “OFF” position. If the car is equipped with a key-operated, in-car stop switch, use the key,...

ASME A17.5 pdf download

ASME A17.5 pdf download

ASME A17.5 pdf download Elevator and escalator electrical equipment 1 Scope 1.1 The requirements of this Standard apply to the following electrical equipment for elevators, escalators,moving walks, dumbwaiters, material lifts, and elevating devices for persons with physical disabilities(platform lifts and stairway chairlifts): (a)motor controllers; (b)motion controllers;(coperation controllers;(d) operating devices; and (e) all other electrical equipment not listed/certified and labelled/marked according...

ASME A17.6 pdf download

ASME A17.6 pdf download

ASME A17.6 pdf download Standard for Elevator Suspension, Compensation, and Governor Systems 1.3.4 Mechanical Properties1.3.4.1 Wire 1.3.4.1.1 Wire Tensile Strength. Ratio between themaximum force obtained in a tensile test and the nomi-nal cross sectional area of the test piece. Requirements for wire tensile strength are determinedby the tensile strength grade or wire level as specifiedin this Standard for outer wire,...

ASME A18.1 pdf download

ASME A18.1 pdf download

ASME A18.1 pdf download Safety Standard for Platform Lifts and Stairway Chairlifts pit: that portion of a runway extending from the sill level ofthe lowest landing to the floor at the bottom of the runway.platform: the load-carrying unit, including, but not limitedto frame, floor,enclosure, seat, and door or gate. platform frame: a structural frame composed of intercon-necting members that supports...

ASME A90.1 pdf download

ASME A90.1 pdf download

ASME A90.1 pdf download Safety Standard for Belt Manlifts manlift: a power-driven endless belt that moves in onedirection only,and is provided with steps (platforms)and handholds for the transportation of personnel fromfloor to floor. rated speed: the speed of the belt at which the manlift isdesigned to run (refer to para. 5.4). safefy sfop device: any electrical or electromechanicaldevice (such as...