ASME RT-1 pdf download
ASME RT-1 pdf download Safety Standard for Structural Requirements for Light Rail Vehicles 3 INTEROPERABILITY This section covers geometric compatibility and crush mechanism design considerations for different vehicles operating on the same routes of the subject transit system. 3.1 Anticlimber and Coupler Interface Each light rail vehicle shall incorporate an anticlimber at each end of the vehicle. The height and...
ASME RT-2 pdf download
ASME RT-2 pdf download Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles 4 STRUCTURAL REQUIREMENTS The carbody shall withstand the maximum loads con- sistent with the operational requirements and achieve the required service life under normal operating condi- tions. The carbody design shall be based on the design load requirements specified in section 5. The capability ofthe structure...
ASME SA 240 pdf download
ASME SA 240 pdf download SPECIFICATION FOR CHROMIUM AND CHROMIUM-NICKEL STAINLESS STEEL PLATE, SHEET, AND STRIP FOR PRESSURE VESSELS AND FOR GENERAL APPLICATIONS 1. Scope 1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications including architectural, building, construction, and aesthetic applications. 1.2 The values stated in either SI...
ASME SA-31 pdf download
ASME SA-31 pdf download SPECIFICATION FOR STEEL RIVETS AND BARS FOR RIVETS, PRESSURE VESSELS 7.1.2 Snap gage measurement shall be made at the point of minimum diameter, but it is not required that the rivet shall turn completely in the gage. Measurements of the maximum tolerance shall be made with a ring gage, all rivets to slip full to the...
ASME SA240 pdf download
ASME SA240 pdf download SPECIFICATION FOR CHROMIUM AND CHROMIUM- NICKEL STAINLESS STEEL PLATE, SHEET, AND STRIP FOR PRESSURE VESSELS AND FOR GENERAL APPLICATIONS 1. Scope 1.1This specification covers chromium,chromium-nickel,and chromium-manganese-nickel stainless steelplate, sheet, and strip for pressure vessels and for generalapplications. 1.2The values stated in either inch-pound units or sIunits are to be regarded separately as standard.The valuesstated in each...
ASME SA268 pdf download
ASME SA268 pdf download SPECIFICATION FOR SEAMLESS AND WELDED FERRITIC AND MARTENSITIC STAINLESS STEEL TUBING FOR GENERAL SERVICE 1. Scope 1.1 This specification covers a number of grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and high-temperature service. Most of these grades are commonly known as the “straight-chro- mium” types and are characterized by being ferromagnetic. Two of these...
ASME SA335 pdf download
ASME SA335 pdf download SPECIFICATION FOR SEAMLESS FERRIITIC ALLOY-STEEL PIPE FOR HIGH-TEMPERATURE SERVICE 13.2 The following information is for the benefit of the user of this specification: 13.2.1 The reference standards defined in 13.8 are convenient standards for standardization of nondestructive examination equipment. The dimensions ofthese standards should not be construed as the minimum size imperfection detectable by such equipment....
ASME SA-435 pdf download
ASME SA-435 pdf download Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates 1. Scope 1.1 This specification covers the procedure and acceptance standards for straight-beam, pulse-echo, ultrasonic examina- tion of rolled fully killed carbon and alloy steel plates, 1 ⁄ 2 in. [12.5 mm] and over in thickness. It was developed to assure delivery of steel plates free of...
ASME SA-513 pdf download
ASME SA-513 pdf download SPECIFICATION FOR ELECTRIC-RESISTANCE-WELDED CARBON AND ALLOY STEEL MECHANICAL TUBING 4. Materials and Manufacture 4.1 The steel may be made by any process. 4.2 If a specific type of melting is required by the purchaser, it shall be as stated on the purchase order. 4.3 The primary melting may incorporate separate degassing or refining, and may be...
ASME SA516 pdf download
ASME SA516 pdf download SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE 1.1 This specification covers carbon steel plates intended primarily for service in welded pressure vessels where im- proved notch toughness is important. 1.2 Plates under this specification are available in four grades having different strength levels as follows: Grade U.S. [SI] Tensile Strength, ksi...