ASME B18.10 pdf download
ASME B18.10 pdf download Track Bolts and Nuts 2.2 Necks Types of track bolts are designated as “oval neck” and”elliptic neck.” 2.3 Body Diameters This Standard provides for two styles of body diame-ters. Bolts shall be provided with a full size body inaccordance with the respective table dimensions of Table1 or 2 for body diameter,E, unless a reduced bodydiameter is...
ASME B18.15 pdf download
ASME B18.15 pdf download Forged Eyebolts 1 sCOPE This Standard is limited to dimensions and capacitiesfor carbon steel and corrosion-resistant stainless steel,forged threaded eyebolts intended primarily for liftingapplications.For carbon steel construction, the sizes arelimited to ‘/4 in. through 2hin., and for corrosion-resistant stainless steel construction, the sizes are limitedto 1’/4 in. through 1/in. This Standard covers the follow-ing types and...
ASME A112.18.8 pdf download
ASME A112.18.8 pdf download Sanitary Waste Valves for Plumbing Drainage Systems 3.1.2 Performance Requirements. The valve shall demonstrate flow rates not less than (a) 1 1 ∕ 4 in. (31.8 mm): 9.5 gpm (36 L/min), valve alone on wash basin, bidet (b) 1 1 ∕ 2 in. (38.1 mm): 13.5 gpm (51 L/min), valve alone on bath (c) 1 1...
ASME A112.19.1 pdf download
ASME A112.19.1 pdf download Enamelled cast iron and enamelled steel plumbing fixtures Enamelled cast iron — a product cast from molten iron and coated with enamel fused to the metal(see Porcelain enamel). Note:The enamel coating is hard, glossy opaque, and acid resistant and, in combination with the solid cast iron base,produces a rigid, durable product. Finish the texture and condition...
ASME A112.19.2 pdf download
ASME A112.19.2 pdf download ASME A112.19.2-2013/CSA B45.1-13 Ceramic plumbing fixtures China — Non-vitreous china —ceramic material in which porosity results in a water absorption of between0.5 and 15.0% of the original weight of the dry specimen (see Clause 6.1). Vitreous china — ceramic material fired at a high temperature to form a non-porous body with amaximum water absorption of 0.5%...
ASME A112.19.3 pdf download
ASME A112.19.3 pdf download STAINLESS S’ ‘EEL PLUMBING FIXTURES (DESIGNED FOR RESIDENTIAL USE) 2.2 Surface Finish Ail fixture surfaces shall be free from die marks, blemishes, wrinkles, and roping when inspected as described in para. 4.1. (See para. 1.6 for definitions.) 2.3 Construction of Stainless Steel Fixtures Sink and lavatory fixtures shall be either drawn se.amless or welded. Welds shall...
ASME A112.19.7 pdf download
ASME A112.19.7 pdf download Hydromassage bathtub systems 4.12 Suction fitting cover apertures Suction fitting cover apertures shall not allow the passage of a 7.87 mm (0.31 in) circular rod with an applied force of 22 N (5 lbf). 5 Testing 5.1 Installation Hydromassage bathtub systems shall be installed in accordance with the manufacturer’s instructions. When installation tolerances are specified, the...
ASME A112.19.8A pdf download
ASME A112.19.8A pdf download Addenda to ASME A112.19.8-2007 Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs 3.3.2 Performance Requirement. Suction fittings shallnotpermanentlydeform,crack, orlose anymaterial from the fitting, exclusive of plating or finish. 3.4 Horizontal Load and Deformation Test Fittings to be tested shall be the six as previously tested in para. 3.3. This test is...
ASME A112.19.12 pdf download
ASME A112.19.12 pdf download Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems 3.1.2.2 Test Method. The assembled system shall be operated throughout its full range of vertical adjust- ment and the travel shall be measured. 3.1.2.3 Performance Requirement. The carrier shall provide a vertical adjustment of not less...
ASME A112.19.13 pdf download
ASME A112.19.13 pdf download ELECTROHYDRAULIC WATER CLOSETS 1.4 Electrohydraulic Water Closet An electrohydraulic water closet is a siphonic or wash-down water closet as described in ASME A112.19.2M with a nonmechanical trap seal. The water closet incorporates electrical motor(s), pump(s), and controllers to facilitate the flushing action. In this Standard, the term water closet means an electrohydraulic water closet unless otherwise...