IEEE Std 379 pdf download IEEE Standard for Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems The safety systems shall perform all required safety functions for a design basis event in the presence of thefollowing: Any single detectable failure within the safety systems concurrent with all identifiable but non-detectable failures -All failures caused by the single...
IEEE Std 1542 pdf download IEEE Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines 1. Overview 1.1 Scope The guide is based on industry practices and presents guidelines for installation, maintenance, and operationof above ground irigation equipment near or under power lines as they pertain to minimum distance toenergized conductors and proper grounding...
IEEE Std 1562 pdf download IEEE Recommended Practice for Sizing of Stand-Alone Photovoltaic (PV) Systems 4.Outline of sizing methodology 4.1 General Part of the process of sizing of a stand-alone photovoltaic(PV) system is to determine the required numberof PV modules and the capacity of the battery. Other sizing aspects include wire, charge controllers, inverters,etc., which are beyond the scope of...
IEEE Std 1591.2 pdf download IEEE Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable IEEE Std 1222TM, IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS)Fiber Optic Cable for Use on Electric Utility Power Lines. ISO 1461,Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods.ISO 4892,Plastics—Methods of exposure to...
IEEE Std 1594 pdf download IEEE Standard for Helically-Applied Fiber Optc Cable Systems (WRAP) for Use on Overhead Utlity Lines Where fiber loss measurements are required, at least ten fibers, or 100% of the fibers if less than ten fibers, ofthe test cable shall be mcasured for optical attenuation or attenuation change. Where the fibers are housed inmore than one...
IEEE Std 1610 pdf download IEEE Guide for the Application of Faulted Circuit Indicators on Distribution Circuits 1.2 Purpose The purpose of this guide is to provide an industry document that provides information isinformative for the application and use of FCIs on three-phase circuits in the electric power industrydistribution systems. 2.Definitions, acronyms, and abbreviations 2.1 Definitions For the purpose purposes...
IEEE Std 1619.1 pdf download IEEE Standard for Authenticated Encryption with Length Expansion for Storage Devices cipher block chaining with keyed-hash message authentication code (CBC-HMAC): A family of cryptographic modes that uses the cipher block chaining (CBC) mode (see NIST SP 800-38A) forconfidentiality and a key-hash message authentication code(HMAC) for integrity (see NISTFIPS 198). cipher block chaining with keyed-hash message...
IEEE Std 1619 pdf download IEEE Standard for Cryptographic Protection of Data on Block- Oriented Storage Devices 4.3 Special term Data unit:Within lEEE Std 1619TM”,128 or more bits of data within a key scope.The first data unit in a keyscope starts with the first bit of the key scope; each subsequent data unit starts with the bit after the end...
IEEE Std 1623 pdf download IEEE Guide for the Functonal Specifcaton of Medium Voltage (1kV to 35kV) Electronic Shunt Devices for Dynamic Voltage Compensaton The device can be built with smaller modules connected in parallel or scries.The manufacturer should specifythe module size, the number of modules, the module configuration and the number of modules that can failwithout having to shut...
IEEE Std 1642 pdf download IEEE Recommended Practice for Protecting Publicly Accessible Computer Systems from Intentional Electromagnetic Interference (IEMI) 1.3 Background The term high-power electromagnetics (HPEM) has been used for many years and generally describes a set of transient EM environments where the peak electric and magnetic fields can be very high. The typical environments considered in the past as...