ASME HST-2 pdf download
ASME HST-2 pdf download Performance Standard for Hand Chain Manually Operated Chain Hoists SECTION 2-0.1:sCoPE (a) This Standard establishes performance requirements for hand chain manually operated chain hoists for verticallifting service involving material handling of freely suspended(unguided) loads, using welded link type load chain as alifting medium, with one of the following types of suspension: (1) hook or clevis (2)...
ASME HST-3 pdf download
ASME HST-3 pdf download Performance Standard for Lever Hoists SECTION 3-0.1 sCoPE (a) This Standard establishes performance require-ments for chain, wire rope, and web strap lever hoistsfor lifting, pulling, and tensioning applications (seeFigures 3-0.1-1,3-0.1-2,3-0.1-3, and 3-0.1-4). (b) The specifications and information in this Standardapply to lever hoists of the following types: (1) ratchet-and-pawl operation with (-a) roller-type load chain lifting...
ASME HST-4 pdf download
ASME HST-4 pdf download Performance Standard for Overhead Electric Wire Rope Hoists SECTION 4-1.1 GENERAL All equipment selected in accordance with this Standard is designed to perform satisfactorily when installed, inspected, tested, operated, and maintained in accordance with Chapters 16-1 through 16-4 of ASME B30.16 and used within the rated load and hoist duty service classification. All equipment shall provide...
ASME HST-5 pdf download
ASME HST-5 pdf download Performance Standard for Air Chain Hoists sECTION 5-0.1: sCOPE (a) This Standard establishes performance requirements for air-powered chain hoists for vertical lifting service in-volving material handling offreely suspended(unguided) loads using load chain ofthe roller or welded linktypes withoneof the following types of suspension: (1) lug (2) hook or clevis(3) trolley (b) This Standard is applicable to...
ASME HST-6 pdf download
ASME HST-6 pdf download Performance Standard for Air Wire Rope Hoists SECTION 6-1.1: GENERAL Allequipmentselected in accordance with thisStandardis designed to perform satisfactorily when installed,inspected,tested,operated, and maintained in accordance with ASME B30.16, Chapters 16-2through 16-4, and used within the ratedload and hoist duty service classification.All equipment shall provide speeds,lifts, and headroom in accordance with themanufacturer’s specifications or specifications agreed upon...
ASME II A351 pdf download
ASME II A351 pdf download SPECIFICATION FOR CASTINGS, AUSTENITIC, AUSTENITIC-FERRITIC (DUPLEX), FOR PRESSURE-CONTAINING PARTS 1.Scope 1.1This specification covers austenitic and austenitic-ferritic (duplex) steel castings for valves, flanges, fittings,and other pressure-containing parts (Note 1). NOTE1 —Carbon steel castings for pressure-containing parts are coveredby Specification A 216/A 216M, and low-alloy steel castings by Specifi-cation A 217IA 217M. 1.2A number of grades of...
ASME II SA29 pdf download
ASME II SA29 pdf download SPECIFICATION FOR STEEL BARS, CARBON AND ALLOY, HOT-WROUGHT, GENERAL REQUIREMENTS FOR 4.Chemical Composition4.1 Limits: 4.1.1 The chemical composition shall conform tothe requirements specified in the purchase order or theindividual product specifications.For convenience thegrades commonly specified for carbon steel bars are shownin Tables 1 and 2. Bars may be ordered to these gradedesignations and when so...
ASME MFC-7 pdf download
ASME MFC-7 pdf download Measurement of Gas Flow by Means of Critical Flow Venturis and Critical Flow Nozzles 1 sCOPE AND FIELD OF APPLICATION This Standard applies only to the steady flow of single-phase gases through critical flow venturis (CFV) of shapesspecified herein [also sometimes referred to as critical flow nozzles (CFN), sonic nozzles, or critical flow venturinozzles]. This Standard...
ASME MFC-8M pdf download
ASME MFC-8M pdf download FLUID FLOW IN CLOSED CONDUITS: CONNECTIONS FOR PRESSURE SIGNAL TRANSMISSIONS BETWEEN PRIMARY AND SECONDARY DEVICES 5 VERTICAL PIPING INSTALLATIONS 5.1 Gas In non–condensing service (see para. 4.1), the con- necting lines from the primary shall slope upward as described for gas service in horizontal lines above (see Fig. C3). 5.2 Liquids See the description for liquid...
ASME MFC-10M pdf download
ASME MFC-10M pdf download METHOD FOR ESTABLISHING INSTALLATION EFFECTS ON FLOWMETERS (c) The tests outlined in this Standard should cover the pertinent range of fluid flow rates, Reynolds num- bers, etc., of the meter to be evaluated. NOTE: This requirement can be satisfied by stating the range of pertinent nondimensionalized parameters over which the data were obtained (see Section 7)....