AS NZS 4020 pdf download – Testing of products for use in contact with drinking water
AS NZS 4020 pdf download – Testing of products for use in contact with drinking water 3.2Colour (true colour) The colour produced by a solution containing 1 mg of platinum per litre (in the form ofhydrogen hexachloroplatinate(IV) in the presence of 2mg “of cobalt(II) chloridehexahydrate per litre). NOTE:The unit of colour is the Hazen Unit (HU).3.3Composite product A product in...
AS NZS 4024.1803 pdf download – Safety of machinery Part 1803: Safety distances and safety gaps—Minimum gaps to prevent crushing of parts of the human body
AS NZS 4024.1803 pdf download – Safety of machinery Part 1803: Safety distances and safety gaps—Minimum gaps to prevent crushing of parts of the human body 1Scope The object of this International Standard is to enable the user (e.g.standard makers, designers of machinery) toavoid hazards from crushing zones. lt specifies minimum gaps relative to parts of the human body and...
AS NZS 4187 pdf download – Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities
AS NZS 4187 pdf download – Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities 1 sCOPE This Standard specifies safety requirements for bunk beds and other elevated beds. Theseinclude material, construction, design, and performance requirements. NOTE: Where this Standard uses term ‘bunk bed’it includes all beds within the...
AS NZS 4220 pdf download – Bunk beds
AS NZS 4220 pdf download – Bunk beds 1 sCOPE This Standard specifies safety requirements for bunk beds. These include material,construction, design, and performance requirements, all of which are important for the well-being of the users (especially children) of bunk beds. 2REFERENCED DOCUMENTS The following documents are referred to in this Standard:AS 2281Flexible cellular polyurethane for seat cushioning and beddingAS/NZS...
AS NZS 4357.0 pdf download – Structural laminated veneer lumber Part 0: Specifications
AS NZS 4357.0 pdf download – Structural laminated veneer lumber Part 0: Specifications 2.1GENERAL Structural LVL shall be manufactured in conformance with a manufacturing specificationthat defines and limits all variables likely to affect or correlate with structural performanceof that specific LVL product. 2.2 MANUFACTURING SPECIFICATION The manufacturing specification shall set the limits on all variables that affect or correlatewith final...
AS NZS 4853 pdf download – Electrical hazards on metallic pipelines
AS NZS 4853 pdf download – Electrical hazards on metallic pipelines 1 SCOPE This Standard specifies voltage limits and corresponding time constraints acceptable on both underground and above-ground pipelines that may be subject to power system influences. Guidance on the mitigation of lightning flash attachments is also provided. NOTE: The acceptable voltage and time limits are based on the conditions...
AS ISO ASTM 52901 pdf download – Additive manufacturing — General principles — Requirements for purchased AM parts
AS ISO ASTM 52901 pdf download – Additive manufacturing — General principles — Requirements for purchased AM parts lt gives guidelines for the elements to be exchanged between the customer and the part provider at thetime ofthe order, includingthe customer order information, part definition data,feedstock requirements,final part characteristics and properties, inspection requirements and part acceptance methods. lt is applicable for...
AS ISO ASTM 52907 pdf download – Additive manufacturing — Feedstock materials — Methods to characterize metal powders
AS ISO ASTM 52907 pdf download – Additive manufacturing — Feedstock materials — Methods to characterize metal powders 1 Scope This document provides technical specifications for metallic powders intended to be used in additive manufacturing and covers the following aspects: — documentation and traceability; — sampling; — particle size distribution; — chemical composition; — characteristic densities; — morphology; — flowability;...
AS NZS 1141.7 pdf download – Methods for sampling and testing aggregates Method 7: Apparent particle density of filler
AS NZS 1141.7 pdf download – Methods for sampling and testing aggregates Method 7: Apparent particle density of filler 1 sCOPE This Standard sets out the method for the determination of the apparent particle density offiller for asphalt. NOTE: The apparent particle density is required to be ascertained in order to determine the voidsin dry compacted filler by the method...
AS NZS 1141.17 pdf download – Methods for sampling and testing aggregates Method 17: Voids in dry compacted filler
AS NZS 1141.17 pdf download – Methods for sampling and testing aggregates Method 17: Voids in dry compacted filler 1 sCOPE This Standard sets out the method for the determination of the voids in dry compacted fillerfor asphalt. 2REFERENCED DOCUMENTS The following documents have been referred to in this Standard:AS 1141 Methods for sampling and testing aggregates 1141.2 Method 2:...