AS NZS 1167.1 pdf download – Welding and brazing—Filler metals Part 1: Filler metal for brazing and braze welding
AS NZS 1167.1 pdf download – Welding and brazing—Filler metals Part 1: Filler metal for brazing and braze welding 1 SCOPE This Standard specifies requirements for filler metals in all forms for brazing and braze welding processes. It includes requirements for chemical composition and analysis, packing and marking. In addition, a standard form of colour coding designed to be mutually...
AS NZS 1249 pdf download – Children’s nightwear and limited daywear having reduced fire hazard
AS NZS 1249 pdf download – Children’s nightwear and limited daywear having reduced fire hazard Where required throughout the Standard, the combination of fabric and trim shall be tested by cutting the specimens so that the point of application of the flame (20 mm from the bottom of the specimen) is at the bottom edge of the trim. The test...
AS NZS 1269.0 pdf download – Occupational noise management Part 0: Overview and general requirements
AS NZS 1269.0 pdf download – Occupational noise management Part 0: Overview and general requirements 7 INDUSTRIAL OTOTOXIC AGENTS Workplaces may also contain ototoxic agents. Ototoxic agents are chemical substances that have a detrimental effect on an individual’s hearing. Threshold shifts produced by these agents may compound those produced by excessive noise exposure. NOTE: See Appendix C for a list...
AS NZS 1269.1 pdf download – Occupational noise management Part 1: Measurement and assessment of noise immission and exposure
AS NZS 1269.1 pdf download – Occupational noise management Part 1: Measurement and assessment of noise immission and exposure 3.4 Exposure to noise Exposure to noise is determined at the person’s ear position without taking into account any protection that may be afforded by personal hearing protectors. 3.5 Partial noise exposure The exposure of a person to noise over a...
AS NZS 1269.3 pdf download – Occupational noise management Part 3: Hearing protector program
AS NZS 1269.3 pdf download – Occupational noise management Part 3: Hearing protector program 3.3 Criterion peak sound pressure level, L(crit) peak The peak sound pressure level above which the provision of hearing protectors is required by legislation or by the organization’s noise policy, whichever is the lower. 3.4 Effective level (of a sound for people wearing hearing protectors) L(eff)...
AS NZS 1301.421 pdf download – Method of test for pulp and paper Method 421: Paper, board and pulps — Determination of pH of aqueous extracts — Cold extraction
AS NZS 1301.421 pdf download – Method of test for pulp and paper Method 421: Paper, board and pulps — Determination of pH of aqueous extracts — Cold extraction 5 Reagents 5.1 Water, distilled or deionised water shall be used throughout the test. The conductivity of the water shall not exceed 0,1 mS/m, after boiling for 1 h and cooling...
AS NZS 1314 pdf download – Prestressing anchorages
AS NZS 1314 pdf download – Prestressing anchorages 3.2.8 Draw-in The movement of a gripping device relative to the anchorage, which takes place during or subsequent to stressing and which is essential to the anchorage’s gripping action. 3.2.9 Excessive deformation Deflections that are equal or greater than the calculated bending deflection, or which are equal or greater than the upper...
AS NZS 1802 pdf download – Electric cables—Reeling and trailing— For underground coal mining
AS NZS 1802 pdf download – Electric cables—Reeling and trailing— For underground coal mining 3.12 Maximum conductor temperature The permitted maximum temperature at the surface of the conductor. 3.13 Multiple-stranded conductor A group of bunches or strands laid up helically and symmetrically such that within any one layer the length of lay of bunches or strands is uniform. 3.14 Pilot/control...
AS NZS 1859.3 pdf download – Reconstituted wood-based panels— Specifications Part 3: Decorative overlaid wood panels
AS NZS 1859.3 pdf download – Reconstituted wood-based panels— Specifications Part 3: Decorative overlaid wood panels 6.1 GENERAL REQUIREMENTS 6.1.1 Veneer The veneer shall comply with the following requirements (see Clause 6.1.3): (a) Each piece of veneer leaf shall be of sound timber, smoothly and tightly cut to a uniform thickness. Veneer thickness shall be 0.5 mm to 0.7 mm...
AS NZS 1906.4 pdf download – Retroreflective materials and devices for road traffic control purposes Part 4: High-visibility materials for safety garments
AS NZS 1906.4 pdf download – Retroreflective materials and devices for road traffic control purposes Part 4: High-visibility materials for safety garments 1.3 DEFINITIONS For the purpose of this Standard, the definitions below apply. 1.3.1 Viewing geometry NOTES: 1 The following are condensed versions of the corresponding definitions given in CIE 54.2. Reference should be made to the CIE document...