AS NZS 2982 pdf download – Laboratory design and construction
AS NZS 2982 pdf download – Laboratory design and construction 1.4.2 Approved, approval With the approval of, acceptable to, and meeting the prescribed standards of the authority having jurisdiction. 1.4.3 AQIS (Australian Quarantine and Inspection Service) Inspects and assesses imports for exotic pests and diseases, and provides certification for a range of exports. 1.4.4 Contaminated Containing harmful or hazardous concentrations...
AS IEC 61131.6 pdf download – Programmable controllers Part 6: Functional safety
AS IEC 61131.6 pdf download – Programmable controllers Part 6: Functional safety This Part of the IEC 61 1 31 series specifies requirements for programmable controllers (PLCs) and their associated peripherals, as defined in Part 1 , which are intended to be used as the logic subsystem of an electrical/electronic/programmable electronic (E/E/PE) safety-related system. A programmable controller and its associated...
AS IEC 62217 pdf download – Polymeric HV insulators for indoor and outdoor use — General definitions, test methods and acceptance criteria
AS IEC 62217 pdf download – Polymeric HV insulators for indoor and outdoor use — General definitions, test methods and acceptance criteria 9 Design tests 9.1 General The following tests are normally classified as design tests, unless otherwise specified in the relevant product standard. The design tests shall be performed only once according to the relevant product standard and the...
AS ISO 3164 pdf download – Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume
AS ISO 3164 pdf download – Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume 1 Scope This International Standard specifies the deflection limiting volume (DLV) to be used when performinglaboratory evaluations of structures which provide protection to operators of earth-moving machineryas defined in ISO 6165. 2Normative references The following documents, in whole or in part,...
AS ISO 3452.1 pdf download – Non-destructive testing – Penetrant testing Part 1: General principles
AS ISO 3452.1 pdf download – Non-destructive testing – Penetrant testing Part 1: General principles The penetrant testing products and equipment shall be used with care and always in compliance with the instructions supplied by the manufacturer. When using filtered UV-A sources, care shall be taken to ensure that unfiltered radiation from the UV-A source does not directly reach the...
AS ISO 5353 pdf download – Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point
AS ISO 5353 pdf download – Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point 5 Technical requirements 5.1 Device for seat index point (SIP) determination The device for determining the SIP shall comply with figure 1. The mass of the device shall be 6 kg ± 1 kg. The work surfaces of the device...
AS ISO 6014 pdf download – Earth-moving machinery — Determination of ground speed
AS ISO 6014 pdf download – Earth-moving machinery — Determination of ground speed 1 Scope and field of application This International Standard specifies a method of determining the speed of earth-moving machinery. Itapplies to both wheeled and track-laying earth-moving machinery. The test method specified may be used for many purposes; for each individual purpose the condition ofthe machine, for example...
AS ISO 6015 pdf download – Earth-moving machinery — Hydraulic excavators and backhoe loaders — Methods of determining tool forces
AS ISO 6015 pdf download – Earth-moving machinery — Hydraulic excavators and backhoe loaders — Methods of determining tool forces 1 Scope This International Standard specifies methods for measuring and calculating the tool forces of earth-moving attachments fitted to hydraulic excavators and the hoe equipment of backhoe loaders. It isapplicable to hydraulic excavators and backhoe loaders as defined in IS0...
AS ISO 6302 pdf download – Earth-moving machinery — Drain, fill and level plugs
AS ISO 6302 pdf download – Earth-moving machinery — Drain, fill and level plugs 1 Scope This International Standard establishes the types, shapes and sizes of the parts of the plugs used inconnection with the hand tools listed in ISO 4510-1 to permit easy removal and installation of plugs atthe work-site.It does not set requirements, i.e. dimensions and materials, for...
AS ISO 6469.3 pdf download – Electrically propelled road vehicles— Safety specifications Part 3: Protection of persons against electric shock
AS ISO 6469.3 pdf download – Electrically propelled road vehicles— Safety specifications Part 3: Protection of persons against electric shock 1Scope This part of ISO 6469 specifies requirements for the electric propulsion systems and conductively connectedauxiliary electric systems, if any, of electrically propelled road vehicles for the protection of persons inside andoutside the vehicle against electric shock. lt does not...