AS NZS 60335.2.32 pdf download – Household and similar electrical appliances — Safety Part 2.32: Particular requirements for massage appliances
AS NZS 60335.2.32 pdf download – Household and similar electrical appliances — Safety Part 2.32: Particular requirements for massage appliances – it only contains circuits operating at safety extra-low voltage according to 8.1.4; – it only contains low power circuits according to 19.11.1; – it is dropped from a height of 1 m on a rigidly supported concrete surface 5...
AS NZS 60335.2.51 pdf download – Household and similar electrical appliances—Safety Part 2.51: Particular requirements for stationary circulation pumps for heating and service water installations
AS NZS 60335.2.51 pdf download Household and similar electrical appliances—Safety Part 2.51: Particular requirements for stationary circulation pumps for heating and service water installations This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric stationary circulation pumps forhousehold and similar purposes intended for use in heating systems or in service watersystems,their...
AS NZS 60598.2.4 pdf download – Luminaires Part 2.4: Particular requirements— Portable general purpose luminaires (IEC 60598-2-4, Ed. 2.0 (1997) MOD)
AS NZS 60598.2.4 pdf download – Luminaires Part 2.4: Particular requirements— Portable general purpose luminaires (IEC 60598-2-4, Ed. 2.0 (1997) MOD) 4.1 General 4.1.1 Scope This section of part 2 of IEC 60598 specifies requirements for portable general purpose luminaires, other than handlamps, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 250...
AS NZS 60598.2.23 pdf download
AS NZS 60598.2.23 pdf download Luminaires Part 2.23: Particular requirements — Extra-low-voltage lighting systems for ELV light sources (IEC 60598-2-23:2020 (ED.2.0) MOD) The installation instructions shall clearly and unambiguously state: a) how the extra-low-voltage lighting system is to be mounted, and in particular, the maximum permitted distance between the main supports and the spacing of auxiliary supports; b) whether special...
AS NZS 60695.2.11 pdf download – Fire hazard testing – Part 2.1 1 : Glowing/hot wire based test methods – Glow-wire flammability test method for end-products (IEC 60695-2-1 1 :2000, MOD)
AS NZS 60695.2.11 pdf download Fire hazard testing – Part 2.1 1 : Glowing/hot wire based test methods – Glow-wire flammability test method for end-products (IEC 60695-2-1 1 :2000, MOD) 4 Description of test considerations and test specimen selection If possible, the test specimen should be a complete end-product. The test specimen shall be chosen so that the conditions of...
AS NZS 60695.11.20 pdf download – Fire hazard testing – Part 1 1 .20: Test flames – 500 W flame test methods (IEC 60695-1 1 -20:1 999, IDT)
AS NZS 60695.11.20 pdf download Fire hazard testing – Part 1 1 .20: Test flames – 500 W flame test methods (IEC 60695-1 1 -20:1 999, IDT) 8.1 .1 Sets of five bar test specimens and three plates shall be conditioned for a minimum of 48 h at 23 °C ± 2 °C and 50 % ± 5 % relative...
AS NZS 60704.2.3 pdf download – Household and similar electrical appliances—Test code for the determination of airborne acoustical noise Part 2.3: Particular requirements for dishwashers
AS NZS 60704.2.3 pdf download Household and similar electrical appliances—Test code for the determination of airborne acoustical noise Part 2.3: Particular requirements for dishwashers The appliance shall be operated according to 3.1 04 and shall be loaded according to 3.1 03. The test must be carried out with unsoiled loads and without detergents and rinsing aids. If the manufacturer’s instructions...
AS NZS 61058.1.1 pdf download – Switches for appliances Part 1.1: Requirements for mechanical switches (IEC 61058-1-1:2016 (ED.1.0) MOD)
AS NZS 61058.1.1 pdf download Switches for appliances Part 1.1: Requirements for mechanical switches (IEC 61058-1-1:2016 (ED.1.0) MOD) 17.1General requirements 17.1.1 Switches shall withstand without excessive wear or other harmful effect theelectrical,thermal and mechanical stresses that occur in normal use. 17.1.2 The sequence of tests to be completed on the same 3 specimens is as follows: – TC3: a test...
AS NZS 62838 pdf download – LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. — Safety specifcations (IEC 62838:2015 (ED.1.0)/COR1: 2017, MOD)
AS NZS 62838 pdf download LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. — Safety specifcations (IEC 62838:2015 (ED.1.0)/COR1: 2017, MOD) 1 scope This International Standard specifies the safety and interchangeability requirements, togetherwith the test methods and conditions，required to show compliance of LED lamps withintegrated means for...
AS NZS ISO 7176.2 pdf download – Wheelchairs Part 2: Determination of dynamic stability of electrically powered wheelchairs
AS NZS ISO 7176.2 pdf download – Wheelchairs Part 2: Determination of dynamic stability of electrically powered wheelchairs 1 Scope This document specifies test methods for determining the dynamic stability of electrically poweredwheelchairs. This document is applicable to electrically powered wheelchairs, including scooters, with a maximumnominal speed not exceeding 15 km/h, intended to carry one person.This document is not applicable...