AS ISO 7134 pdf download
AS ISO 7134 pdf download Earth-moving machinery — Graders — Terminology and commercial specifications This International Standard establishes terminology and the content of commercial literaturespecifications for graders and their equipment. 2Normative references The following documents, in whole or in part, are normatively referenced in this document and areindispensable for its application.For dated references,only the edition cited applies.For undatedreferences, the latest...
AS ISO 14990.2 pdf download
AS ISO 14990.2 pdf download Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems Part 2: Particular requirements for externally-powered machines 1 Scope This document specifies the particular safety requirements for the electrical equipment and itscomponents incorporated in externally-powered (mains-connected, including machines powered byexternal dedicated generators), electrically-driven earth-moving machines (EMMs). lt is applicable to...
BS EN ISO 305 pdf download
BS EN ISO 305 pdf download Plastics – Determination of thermal stability of poly(vinyl chloride), related chlorine- containing homopolymers and copolymers and their compounds – Discoloration method Method B: Oven method 8.1Apparatus tirt=oeRE8pea.ths erert 1r. shall be applied to the temperature measurement. 8.1.1.3The air flow in the oven shall be adjusted to provide a temperature which is sufficiently uniformthroughout the...
BS EN ISO 846 pdf download
BS EN ISO 846 pdf download Plastics – Evaluation of the action of microorganisms 1 Scope This document specifies methods for determining the deterioration of plastics due to the action of fungiand bacteria and soil microorganisms. The aim is not to determine the biodegradability of plastics orthe deterioration of natural fibre composites. The type and extent of deterioration can be...
BS EN ISO 3915 pdf download
BS EN ISO 3915 pdf download Plastics — Measurement of resistivity of conductive plastics 1 Scope This document specifies the requirements for the laboratory testing of the resistivity of speciallyprepared specimens of plastics rendered conductive by the inclusion of conductive fillers orsuitable modification of the structure. The test is applicable to materials of resistivity less than106 Q-cm ( 104 Q-m)....
BS EN ISO 10510 pdf download
BS EN ISO 10510 pdf download Tapping screw and washer assemblies with plain washers 1 Scope This International Standard specifies the requirements for tapping screws and plain washer assemblies withthread sizes from ST2,2 to ST9,5 inclusive, flat seating heads and mechanical properties as specified inISO 2702. The plain washers are captive, i.e. prevented from disassembly and free to rotate. 2Normative...
BS EN ISO 11111-3 pdf download
BS EN ISO 11111-3 pdf download Textile machinery — Safety requirements — Part 3: Nonwoven machinery 4List of significant hazards Significant hazards found in nonwoven machines which are common with those frequently occurring withother textile machines or with machine elements of other textile machines shall be considered in accordancewith ISO11111-1:2005，Clauses 5 and 6,whenever referred to under the heading “General safetyrequirements”...
BS ISO 10110-17 pdf download
BS ISO 10110-17 pdf download Optics and photonics — Preparation of drawings for optical elements and systems — Part 17: Laser irradiation damage threshold 1Scope ISO 10110 specifies the presentation of design and functional requirements for optical elements in technicaldrawings used for manufacturing and inspection. This part of lSO 10110 specifies rules for the indication of the damage threshold from...
BS ISO 10294-5 pdf download
BS ISO 10294-5 pdf download Fire resistance tests — Fire dampers for air distribution systems — Part 5: Intumescent fire dampers 4.1.3 Test procedure 4.1.3.1 General procedure and criteria Other than the exceptions stated below, carry out the test in accordance with lSO 10294-1.The criteria withrespect to integrity and insulation shall be as specified in ISO 10294-2. 4.1.3.1.1Opening and closing...
BS ISO 10302-2 pdf download
BS ISO 10302-2 pdf download Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Part 2: Structure-borne vibration measurements 6.1.3 Static pressure The static pressure of the AMD operating on the plenum should be no greater than 750 Pa. 6.1.4 Air/pressure distribution All relative geometries (such as locations and proportions of the mounting panel...