ISO 21815-1 pdf download

ISO 21815-1 pdf download

ISO 21815-1 pdf download Earth-moving machinery — Collision warning and avoidance — Part 1: General requirements 4Performance requirements 4.1General requirements 4.1.1 General Machinery and systems shall comply with the safety requirements and/or protective/risk reductionmeasures of this document. In addition, the machine and systems shall be designed according to theprinciples of IS0 12100:2010 for relevant but not significant hazards which are...

ISO 21822 pdf download

ISO 21822 pdf download

ISO 21822 pdf download Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of iso-electric point of ceramic powder Materials that do not elute in the range of pH 2 to pH 10 should be used.Special care is needed for sodalime glass, which may elute in a strong base condition. 5.4Sonicator The sample should be dispersed by a tip sonicator,...

ISO 21849 pdf download

ISO 21849 pdf download

ISO 21849 pdf download Aircraft and space — Industrial data — Product identification and traceability 4.3 Conformance classes Permanent machine-readable media product/part identification has two approaches to the representation of data, known as conformance classes. The conformance classes shall apply to direct part marking, labels, nameplates, RFID tags and other forms of machine-readable media. The data elements associated with the...

ISO 22058 pdf download

ISO 22058 pdf download

ISO 22058 pdf download Construction procurement — Guidance on strategy and tactics The parties to the contract can agree to share skills, technology and responsibility and transfer risks. Partnership arrangements can take on different forms to address issues such as spreading the cost of investment over the lifetime of the construction projects, greater predictability over cost and time, lowering of...

ISO 22072 pdf download

ISO 22072 pdf download

ISO 22072 pdf download Aerospace — Electrohydrostatic actuator (EHA) — Characteristics to be defined in procurement specifications 4.4.4Servo-loop dynamic performance and stability The following shall be specified either as the complete servo-oop requirement or as the part allocated to theactuator, taking into account data under 5.6: maximum no-load rate,including,as applicable (in terms of percentage),command amplitude andfrequency; maximum no-load acceleration due...

ISO 22074-8 pdf download

ISO 22074-8 pdf download

ISO 22074-8 pdf download Railway infrastructure — Rail fastening systems — Part 8: Test method for vertical stiffness The calibration of displacement-measuring instruments shall be in accordance with ISO 9513. 6Test procedures for pads 6.1Static test procedure for pads6.1.1 Principle A force is applied normal to the test pad and the displacement is measured.6.1.2Apparatus 6.1.2.1 Controlled temperature test area, area...

ISO 22077-1 pdf download

ISO 22077-1 pdf download

ISO 22077-1 pdf download Health informatics — Medical waveform format — Part 1: Encoding rules 4.2.3.5When the data length is o “Data length O” indicates that the definition indicated by tag resets to the default value.Namely,on theroot definition, the concerned items re-initialize to default values, and in cases of the channel definition,the channel definition is re-initialized to the root definition....

ISO 22140 pdf download

ISO 22140 pdf download

ISO 22140 pdf download Passenger cars — Validation of vehicle dynamics simulation — Lateral transient response test methods Large lateral slip angles and camber angles can occur under the conditions covered in this document. The tire model shall cover the entire range of slip (lateral and longitudinal), inclination angle relative to the ground, and load that occur in the tests...

ISO 22155 pdf download

ISO 22155 pdf download

ISO 22155 pdf download Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method 5.4Shaking machine A shaking machine with horizontal movement (200 to 300 movements per minute).5.5Capillary columns Fused silica capillary columns with a non-polar or semi-polar stationary phase allowing sufficient separation ofthe compounds of interest. A thick film of...

ISO 20339 pdf download

ISO 20339 pdf download

ISO 20339 pdf download Non-destructive testing — Equipment for eddy current examination — Array probe characteristics and verification 6 Measurement of electrical and functional characteristics of an array probe6.1 Electrical characteristics 6.1.1 General The electrical characteristics alone do not define the probe characteristics in its application. The methods and measuring instruments given below are for guidance; other equivalent methodsand instrumentation...