Jul,21

IEEE Std 45.6 pdf download

IEEE Std 45.6 pdf download

IEEE Std 45.6 pdf download IEEE Recommended Practice for Electrical Installations on Shipboard—Electrical Testing
1. Overview1.1 Scope
The recommendations for electrical testing for power generation, distribution, and electric propulsion systemsinstalled shipboards are established by this document. These recommendations reflect the present day technol-ogies, engineering methods, and engineering practices.
This document is intended to be used in conjunction with the IEEE Std 45TM series.
1.2 Purpose
The main purpose of this recommended practice is to provide a consensus of recommended testing practicesin the unique field of marine electrical engineering as applied specifically to ships, shipboard systems, andequipment (including maritime platforms).
1.3 Equipment construction, testing, and certification
Electrical apparatus and equipment should be constructed and tested in accordance with the requirements ofappropriate national and international equipment standards. Standards specifically addressing marine require-ments should be used whenever applicable. Many appropriate standards are referenced in this document. Allelectrical equipment should be tested and certified, with labeling and follow-up services (i.e., listed) by a rec-ognized independent laboratory acceptable to the authority having jurisdiction.
1.4 Application of various national and international standards
Special precautions must be exercised when mixing equipment designed to differentnational and internationalstandards.
Coordination of different equipment design and testing standards,construction ratings, installation methods,and performance must be carefully analyzed.
2. Normative references
The following referenced documents are indispensable for the application of this document (i.e. they mustbe understood and used, so each referenced document is cited in text and its relationship to this document isexplained). For dated references, only the edition cited applies. For undated references, the latest edition of thereferenced document (including any amendments or corrigenda) applies.
API RP 14F,Recommended Practice for Design and Installation of Electrical Systems for Offshore Produc-tion Platforms.’
APl Std 541:2014-12,Form-Wound Squirrel-Cage Induction Motors—500 Horsepower and Larger.CSA22.2 No.245: 2015,Marine Shipboard Cable.2
IEC 60034-1,Rotating electrical machines—Part 1: Rating and performance.3
IEC 60034-2-1,Rotating electrical machines—Part 2-1:Standard methods for determining losses and effi-ciency from tests (excluding machines for traction vehicles).
IEC 60034-27,Rotating electrical machines—Off-line partial discharge measurements on the stator windinginsulation of rotating electrical machines.
IEC 60060-2,High-voltage test techniques—Part 2: Measuring systems.IEC 60068-2-1,Environmental testing—Part 2-1:Tests—Test A:Cold.IEC 60068-2-2, Environmental testing—-Part 2-2: Tests—Test B: Dry Heat.IEC 60068-2-30,Environmental testing—Part 2:Tests—Damp heat, cyclic.IEC 60068-2-52, Environmental testing—Part 2: Test methods.
IEC 60068-2-6, Environmental testing——Part 2.
IEC 60270,High-Voltage Test Techniques—Partial Discharge Measurements.
IEC 60439-1,Low-voltage switchgear and control gear assemblies—Part 1: Type-tested and partiallytype-tested assemblies.
IEC 60664-4,Insulation coordination for equipment within low-voltage systems—Part 4: Considerationhigh-frequency voltage stress.
IEC60947,Low-Voltage Switchgear and Controlgear.
IEC 61000-4-2,Electromagnetic compatibility (EMC)—Part 4-2: Testing and measurement techniques一Electrostatic discharge immunity test.
IEC 61000-4-5,Electromagnetic compatibility (EMC)—Part 4-5: Testing and measurement techniques—Surge immunity test.
IEC 61000-4-6,Electromagnetic compatibility (EMC)—Part 4-6: Testing and measurement techniques—Im-munity to conducted disturbances, induced by radio-frequency fields.
IEC 61934, Electrical insulating materials and systems—Electrical measurement of PD under short rise timeand repetitive voltage impulses.
IEC 61960, Secondary cells and batteries containing alkaline or other non-acid electrolytes—Secondary lithi-um cel1s and batteries for portable applications.
IEC 62133, Secondary cells and batteries containing alkaline or other non-acid electrolytes—Safety require-ments for portable sealed secondary cells, and for batteries made from them, for use in portable applications.IEC 62271-1,High-Voltage Switchgear and Controlgear, Part 1 : Common Specifications(ETD 8:High Volt-age Switchgear and Controlgear).
IEC 62271-100,High-Voltage Switchgear and Controlgear,Part 100: High-voltage alternating-currentcircuit-breakers.
IEC 62271-106, High-Voltage Switchgear and Controlgear, Part 106: Alternating current contactors, contac-tor-based controllers and motor-starters.
IEC 62271-200, High-Voltage Switchgear and Controlgear,Part 200:AC metal-enclosed switchgear and con-trolgear for rated voltages above 1 kv and up to and including 52 kV.
IEEE Std C37.20.1 TM, IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear.’-5IEEE Std C37.20.2TM,IEEE Standard for Metal-Clad Switchgear.
IEEE Std 43TM, IEEE Recommended Practice forTesting Insulation Resistance of Electric Machinery.IEEE P45.1(Draft 1.0,June 2015), Prime movers.
IEEE Std 45.8TM,IEEE Recommended Practice for Electrical Installations on Shipboard—Cable Systems.

Download
The previous

IEEE Std 45.4 pdf download

The next

IEEE Std 45.8 pdf download

Related Standards