BS ISO 24631-6 pdf download

BS ISO 24631-6 pdf download Radiofrequency identification of animals Part 6: Representation of animal identification information (visual display/ data transfer)
1 Scope
This part of lSO 24631 specifies the representation of the animal identification information specified inISo 11784 and lS0 11785 on a transceiver display and its communication from transceivers to systems inwhich the information may be stored in a database, used for process control or displayed.
2Normative reference
The following referenced documents are indispensable for the application of this document.For datedreferences, only the edition cited applies.For undated references, the latest edition of the referenced document(including any amendments) applies.
IS0 3166-1,Codes for the representation of names of countries and their subdivisions —Part 1:Country codesISO/IEC 8859-15, Information technology — 8-bit single-byte coded graphic character sets — Part 15: Latinalphabet No.9
ISO 11784， Radio frequency identification of animals – Code structureISO 11785, Radio frequency identification of animals – Technical concept
ISO 24631-1:2009,Radiofrequency identification of animals —Part 1: Evaluation of conformance of RFIDtransponders with ISO 11784 and ISO 11785(including granting and use of a manufacturer code)
3Terms and definitions
For the purposes of this document, the following terms and definitions apply.3.1
animal code
bit pattern to identify an animal[ISO 11784]
3.2
country code
three-digit numeric code representing a country in accordance with ISO 3166-1
3.3
identification code
part of the code that is used for identification (control codes such as header, trailer and checksum are excluded)[ISO 11784]
3.4
interface
llink between transceiver and data terminal
3.5
manufacturer codeMFC
three-digit number granted by the registration authority (RA) to a manufacturer under the conditions set forth inISO24631-1:2009,AnnexE, whose range and placement within the code structure are in accordance with ISO11784NOTEOnly one manufacturer code is granted to the same manufacturer.
[ISO 11784]
3.6
national identification code
code field with a unique number within a country[ISO 24631-1]
3.7
transceiver
device used to communicate with a transponder[ISO 24631-1]
3.8
transponder
radiofrequency identification (RFID) device that transmits its stored information when activated by a transceiverand that may be able to store new information
[ISO 24631-1]
3.9
retagging
process that assigns to a new transponder the same identification number as a transponder that has been lostor that is no longer readable
[IsO 24631-1]
3.10
retagging counter
three-bit counter for counting the number of retagging[ISO 24631-1]
3.11
user information field
five-bit field for additional user information, used only in conjunction with a country code[ISO 24631-1]
4lnformation representation
4.1General
The animal code consists of the combination of acountry code and nationalidentification code orof a manufacturercode and an identification code.Both combinations provide a unique worldwide identification number.
In either combination, the animal code consists of 15 decimal digits, split into either a numeric-3 country codein accordance with IS0 3166-1 or a manufacturer code and decimal numeric-12(national) identification code.