BS ISO 10425 pdf download

BS ISO 10425 pdf download

BS ISO 10425 pdf download Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance
1 Scope
This International Standard specifies the minimum requirements and terms of acceptance for the manufactureand testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries.
Typical applications include tubing lines, rod hanger lines, sand lines, cable-tool drilling and clean out lines,cable tool casing lines, rotary driling lines,winch lines, horse head pumping unit lines,torpedo lines,mast-raising lines, guideline tensioner lines, riser tensioner lines, mooring and anchor lines. Ropes for litingslings and cranes, and wire for well-measuring and strand for well-servicing, are also included.
The minimum breaking forces for the more common sizes, grades and constructions of stranded rope aregiven in tables.However, this International Standard does not restrict itself to the classes covered by thosetables.Other types, such as ropes with compacted strands and compacted (swaged) ropes, may also conformwith its requirements. The minimum breaking force values for these ropes are provided by the manufacturer.
For information only, other tables present the minimum breaking forces for large diameter stranded and spiralropes (i.e. spiral strand and locked coil), while approximate nominal length masses for the more commonstranded rope constructions and large diameter stranded and spiral ropes are also given.
2Normative references
The following referenced documents are indispensable for the application of this document. For datedreferences,only the edition cited applies. For undated references,the latest edition of the referenceddocument (including any amendments)applies.
ISO 2232:1990, Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steelwire ropes — Specifications
ISO 4345,Steel wire ropes — Fibre main cores – Specification
ISO 4346,Steel wire ropes for general purposes—Lubricants— Basic requirementsISo 6892,Metallic materials – Tensile testing at ambient temperature
ISO7500-1,Metallc materials – Verification of static uniaxial testing machines – Part 1:Tension/compression testing machines — Verification and calibration of the force-measuring system
ISO 7800,Metallic materials – Wire —Simple torsion test
ISO 7801, Metallic materials — Wire — Reverse bend test
ISO 178932), steel wire ropes — Definitions, designations and classifications

The previous

BS ISO 10302-2 pdf download

The next

AS ISO 6747 pdf download

Related Standards