AS ISO 6747 pdf download

AS ISO 6747 pdf download

AS ISO 6747 pdf download Earth-moving machinery — Dozers — Terminology and commercial specifications
1 Scope
This International Standard establishes terminology and the content of commercial literaturespecifications for self-propelled crawler and wheeled dozers and their equipment.
2Normative references
The following documents, in whole or in part, are normatively referenced in this document and areindispensable for its application.For dated references,only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amendments) applies.
ISO 5010, Earth-moving machinery —Rubber-tyred machines —Steering requirements
ISO 6014,Earth-moving machinery — Determination of ground speed
ISO 6746-1,Earth-moving machinery —Definitions of dimensions and codes —Part 1:Base machine
ISO 6746-2,Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment andattachments
ISO 7457,Earth-moving machinery — Determination of turning dimensions of wheeled machinesISO 9249:2007, Earth-moving machinery — Engine test code — Net power
ISO 15550:2002, Internal combustion engines —Determination and method for the measurement of enginepower -General requirements
3Terms and definitions
For the purposes of this document, the following terms and definitions apply.3.1 General
self-propelled crawler or wheeled machine with equipment having either a dozing attachment whichcuts, moves and grades material through forward motion of the machine or a mounted attachment usedto exert a push or a pull force
[SOURCE: 1SO 6165:2012,4.1]Note 1 to entry: See Figures 10,
base machine
machine with a cab or canopy and operator-protective structures if required, without equipment orattachments but possessing the necessary mounting for such equipment and attachments
[SOURCE:ISO 6746-1:2003,3.3]
set of components mounted onto the base machine that allows an attachment to perform the primary design function of the machine
[SOURCE: ISO 6746-2:2003, 3.4]
assembly of components that can be mounted onto the base machine or equipment for specific use
[SOURCE: ISO 6746-2:2003, 3.5]
part, or assembly of parts, of a base machine, equipment or attachment
[SOURCE: ISO 6746-2:2003, 3.6]
dozing equipment
front blade and its frame and relevant positioning devices
straight dozer
dozer where the blade is maintained in a position where the cutting edge is parallel to an X plane
Note 1 to entry: See Figure 1.

The previous

BS ISO 10425 pdf download

The next

BS ISO 10619-3 pdf download

Related Standards