AS 3715 pdf download – Metal finishing—Thermoset powder coatings for architectural applications of aluminium and aluminium alloys

AS 3715 pdf download – Metal finishing—Thermoset powder coatings for architectural applications of aluminium and aluminium alloys
1.1 sCOPE
This Standard sets out test procedures and specifies performance requirements forthermoset powder coatings applied to aluminium and aluminium-alloy substrates intendedfor architectural applications.
This Standard applies only to thermoset powder coatings for exterior architectural uses.NOTES:
1Appendix A contains advice and recommendations on information which should be suppliedby the purchaser at the time of enquiry or order.
2Information on weathering performance of powder-coated aluminium products is given inAppendix B.
3Information on maintenance and repair of coatings is given in Appendix C.
4 Advice on handling and temporary protection during transportation and installation is given in
Appendix D.
1.2 REFERENCED DOCUMENTS
The following documents are referred to in this Standard:AS
1199
Sampling procedures and tables for inspection by attributes
1399
Guide to AS 1199—Sampling procedures and tables for inspection byattributes
1580
Paints and related materials——Methods of test
1580.408.4Method 408.4: Adhesion (cross-cut)
1580.481.3 Method 481.3: Corrosion—Exposed to weathering—Degree of corrosion of
coated metal substrates
1580.483.1 Method 483.1: Resistance toartificial weathering (carbon-arc type
instruments)
1635
Methods of test for pressure-sensitive adhesive tape
1635.3.1
Method 3.1:Adhesion strength
1672
Limes and limestones
1672.1
Part 1:
Limes for building
1745
Outdoor weathering of plastics in the Australian environment
1745.1
Part 1:Commercial products
2331
Method of test for metallic and relating coatings
2331.1.4
Method 1.4: Local thickness tests—Magnetic induction and eddy current
2331.3.2
Method 3.2:Corrosion and related property tests–Acetic acid salt spray
test (ASS test)