ISO 22402-2 pdf download

ISO 22402-2 pdf download Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series
1 Scope
This document specifies the dimensions of medium-transfer units for wet processing and interfaces machine tool with insert nuts, which are used in polygonal taper in accordance with the ISO 26623 series.
2 Normative references
There are no normative references in this document.
3? Terms? and? definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Transfer units for polygonal taper interfaces
4.1 Transfer unit for polygonal taper interface, nominal sizes 32 to 80
The transfer units for polygonal taper interfaces for nominal sizes 32 to 80 shall be carried out according to Figure 1 and Table 1.
4.2 Transfer unit for polygonal taper interface, nominal size 100
The transfer unit for polygonal taper interfaces for nominal size 100 shall be carried out according to Figure 2 and Table 1.