Jul,04

IEC 62149-5 pdf – Fibre optic active components and devices – Performance standards – Part 5: ATM-PON transceivers with LD driver and CDR ICs

IEC 62149-5 pdf – Fibre optic active components and devices – Performance standards – Part 5: ATM-PON transceivers with LD driver and CDR ICs

IEC 62149-5 pdf – Fibre optic active components and devices – Performance standards – Part 5: ATM-PON transceivers with LD driver and CDR ICs
1 Scope
This part of IEC 62149 specifies performance on the transceiver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the International
Telecommunication Union (ITU) in ITU-T Recommendation G.983.1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references, only the edition cited applies.
For undated’ references,the latest edition of the referenced document(including anyamendments) applies.
IEC 60068-2-6, Environmental testing – Part 2-6:Tests – Test Fc: Vibration (sinusoidal)IEC 60068-2-27,Environmental testing – Part 2-27:Tests – Test Ea and guidance: Shock
IEC 60332-3-24,Tests on electric and optical fibre cables under fire conditions – Part 3-24:Test for vertical flame spread of vertically-mounted bunched wires or cables- Category c
IEC 60825-1,Safety of laser products – Part 1:Equipment classification and requirementsIEC 60950-1,Information technology equipment – Safety – Part 1: General requirements
IEC 61000-6-3,Electromagnetic compatibility(EMC)-Part 6-3:Generic standards – Emissionstandard for residential, commercial and light-industrial environments
IEC 61280-1-1,,Fibre optic communication subsystem basic test procedures – Part 1-1: Testprocedures for general communication subsystems – Transmitter output optical powermeasurement for single-mode optical fibre cable
IEC 61280-1-3, Fibre optic communication subsystem test procedures – Part 1-3: Generalcommunication subsystems -Central wavelength and spectral width measurement
IEC 61280-2-2, Fibre optic communication subsystem test procedures – Part 2-2: Digitalsystems – Optical eye pattern, waveform and extinction ratiomeasurement
IEC 61300-2-4,Fibre optic interconnecting devices and passive components -Basic test andmeasurement procedures -Part 2-4: Tests – Fibre or cable retention
IEC 61300-2-17,Fibre optic interconnecting devices and passive components- Basic test andmeasurement procedures-Part 2-17: Tests – Cold
IEC 61300-2-18 , Fibre optic interconnecting devices and passive components – Basic test andmeasurement procedures – Part 2-18:Tests – Dry heat – High temperature endurance
IEC 61300-2-22,Fibre optic interconnecting devices and passive components- Basic test andmeasurement procedures- Part 2-22: Tests -Change of temperature
IEC 61300-3-6,Fibre optic interconnecting devices and passive components – Basic test andmeasurement procedures- Part 3-6: Examinations and measurements-Return loss
lEC 61753-1, Fibre optic interconnecting devices and passive components – Performancestandard – Part 1 : General and guidance
IEC 62148-1,Fibre optic active components and devices- Package and interface standards -Part 1: General and guidance
IEC 62150-2,Fibre optic active components and devices -Test and measurement procedures- Part 2: ATM-PON transceivers
ITU-T Recommendation G.957:2006,Optical interfaces for equipments and systems relating tothe synchronous digital hierarchy
ITU-T Recommendation G.983.1:2005, Broadband optical access systems based on PassiveOptical Networks (PON)
3Term,definitions and abbreviated terms
3.1Terms and definitions
For the purposes of this document, the following terms, definitions and abbreviated terms apply.
lsO and lEC maintain terminological databases for use in standardization at the followingaddresses:
. lso Online browsing platform: available at https://www.iso.orglobp. IEC Electropedia: available at http://www.electropedia.orgl
NOTE Further terminology concerning related physical concepts, types of devices,general terms, and terms relatedto ratings and characteristics can be found in IEC 61931.See also ITU-T Recommendation G.983.1.
3.1.1
optical access networkOAN
set of access links sharing the same network-side interfaces and supported by optical accesstransmission systems
Note 1 to entry: The OAN can include a number of ODNs connected to the same OLT.3.1.2
optical distribution networkODN
apparatus or component that provides the optical transmission means from the OLT to the usersand vice versa
Note 1 to entry: The ODN utilizes passive optical components.

Download
The previous

IEC 62148-21 pdf - Fibre optic active components and devices – Package and interface standards – Part 21: Design guidelines of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S‑FLGA)

The next

IEC 62262 pdf - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

Related Standards