AS 2005.21.1 pdf download – Low voltage fuses—Fuses with enclosed fuse–links Part 21.1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)— Standardized fuse systems— Fuses with fuse–links with blade contacts
AS 2005.21.1 pdf download – Low voltage fuses—Fuses with enclosed fuse–links Part 21.1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)— Standardized fuse systems— Fuses with fuse–links with blade contacts 1.1 SCOPE AND APPLICATION. 1.1.1 Scope. The supplementary requirements in this Standard cover fuses with fuse-links having blade contacts intended to be replaced by...
AS 2149 pdf download – Starter batteries—Lead acid
AS 2149 pdf download – Starter batteries—Lead acid 1.3.2 Charge acceptance The current I ca that a partially discharged battery takes up at 0°C and at constant voltage of 14.4 V. 1.3.3 Charge retention The cold cranking performance of a charged and filled battery after storage on open circuit under defined conditions (temperature, time). 1.3.4 Conserved-charged battery A battery that...
AS 2239 pdf download – Galvanic (sacrificial) anodes for cathodic protection
AS 2239 pdf download – Galvanic (sacrificial) anodes for cathodic protection 1.3.2 Anode backfill Material surrounding and in contact with a buried anode to maintain or improve itsperformance. 1.3.3Anode consumption rate The rate of alloy mass consumption for a given current output over a given period; normallystated in kilograms per ampere year. 1.3.4 Anode core A metal insert (usually steel)...
AS 2332 pdf download – Slide fasteners
AS 2332 pdf download – Slide fasteners 3DEFINITIONS For the purpose of this Standard the following definitions apply. Diagrams of the basiccomponents, dimensions and types of slide fastener which illustrate many of the definitionsin this Clause are given in Figures 1 to 4. 3.1Slide fastener A fastening device consisting of two flexible, interlocking stringers (see Clause 3.3.9), withor without end...
AS 2341.26 pdf download – Methods of testing bitumen and related roadmaking products Method 26: Determination of sieve residue
AS 2341.26 pdf download – Methods of testing bitumen and related roadmaking products Method 26: Determination of sieve residue 6 Preparation of sample Samples shall be obtained and prepared for testing in accordance with AS/NZS 2341.21. The sample shall be cooled to room temperature before testing. 7 Procedure Either the 150 μm or the 710 μm sieve may be used...
AS 2341.30 pdf download – Methods of testing bitumen and related roadmaking products Method 30: Recovery of residue from bituminous emulsion
AS 2341.30 pdf download – Methods of testing bitumen and related roadmaking products Method 30: Recovery of residue from bituminous emulsion 1 Introduction The water phase of a bituminous emulsion is evaporated from a weighed sample on a hotplate to recoverthe binder phase for further testing.The test is carried out under an inert atmosphere to minimizebinder hardening during evaporation. This...
AS 2400.5 pdf download – Packaging Part 5: Temporary corrosion protection
AS 2400.5 pdf download – Packaging Part 5: Temporary corrosion protection 3.1 GENERAL All temporary corrosion preventives may be supplied ready for use. Temporary corrosion protection is most commonly applied by dipping though other methods such as spraying, brushing, smearing, roller coating, flow or flood coating, flushing, circulation coating, barrelling and the use of volatile corrosion inhibitors (VCI) are used....
AS 2473.2 pdf download – Valves for compressed gas cylinders Part 2: Outlet connections (threaded) and stem (inlet) threads
AS 2473.2 pdf download – Valves for compressed gas cylinders Part 2: Outlet connections (threaded) and stem (inlet) threads 2.1 VALVE OUTLET CONNECTIONS The outlet connections specified in this Standard are listed in Table 2.1, and assigned to nominated gases in Table 2.2. The standard valve outlet connections are for use within the pressure range up to 20 000 kPa,...
AS 2622 pdf download – Textile products — Fibre content labelling
AS 2622 pdf download – Textile products — Fibre content labelling 1 Scope This Standard sets out two methods for designating the fibre content of textile products and for supplying this information on made-up products, piece goods and yarns. It also specifies the methods to be used for determining the fibre content of a product. This Standard is applicable to...
AS 2758.2 pdf download – Aggregates and rock for engineering purposes Part 2: Specification for sealing aggregate
AS 2758.2 pdf download – Aggregates and rock for engineering purposes Part 2: Specification for sealing aggregate 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. NOTE Documents referenced for informative purposes are listed in the Bibliography. AS 1141.3.1, Methods for...