API 9A pdf download
API 9A pdf download Specifcation for Wire Rope 1 Scope This standard specifies the minimum requirements and terms of acceptance for the manufacture and testingof steel wire ropes for the petroleum and natural gas industries. The following products are covered by thisspecification: — bright- or drawn-galvanized wire rope,— well-measuring wire, and – well-measuring strand. Typical applications include tubing lines, rod...
API 7NRV pdf download
API 7NRV pdf download Specification for Drill String Non-return Valves 4.2 DESIGN REQUIREMENTS 4.2.1 Drawings, manufacturing specifications and the verification test results shall be retained by the manufacturer for a period of ten years after NRVs of that size, model and type are discontinued from the manufacturer’s product line. NRV equipment con- forming to this Standard shall be manufactured to...
API 7CW pdf download
API 7CW pdf download Casing Wear Tests 4.4.3 Substantive changes to the material chemistry or application process shall require requalifcation of thematerial. 4.4.4 The test specimen length and diameter dimensions shall be defined by this standard. 4.5Test Agency Requirements 4.5.1 The test agency shall conduct tests in accordance with this standard. 4.5.2 The test agency shall be responsible for assuring...
API 5UE pdf download
API 5UE pdf download Recommended Practice for Ultrasonic Evaluation of Pipe Imperfections 3.6 angle beam: An inspection method in which the angle of incidence or refraction is other than perpendicular to the surface of the test object being inspected. This includes the use of shear waves and longitudinal (compression) waves. 3.7 angle beam block: A specified type of reference standard...
API 5ST pdf download
API 5ST pdf download Specification for Coiled Tubing U.S. Customary and SI Units Surface macrohardness shall also be measured on the surfaces of skelp-end and tube-to-tube welds. The hardness values shall comply with the requirements given in Table A.2. By agreement, and when specified on the purchase agreement, additional macro- or microhardness tests shall be taken at specified locations. 6.2.3...
API 5LD pdf download
API 5LD pdf download CRA Clad or Lined Steel Pipe 5 Manufacturing of Clad and Lined Steel Pipe 5.1 General Clad pipe or lined steel pipe furnished to this specification shall be seamless or welded, as defined below. All welding consumables shall comply with the requirements of ASME BPVC Section II, Part C (2013.07.01). The thickness of the CRA layer...
API 5L3 pdf – Drop-Weight Tear Tests on Line Pipe
API 5L3 pdf – Drop-Weight Tear Tests on Line Pipe These procedures describe a recommended method for conducting Drop-Weight Tear Tests to measure the fractureappearance or fracture ductility of the pipe as referenced in API Specification 5L, Specification for Line Pipe. 2Normative References The following referenced document is indispensable for the application of this document.For dated references, onlythe edition cited...
API 5LC pdf download
API 5LC pdf download CRA Line Pipe 1) Seamless is defined as wrought tubular product made without a welded seam. It is manufactured by hot working steel or, if necessary, by subsequently cold finishing the hot worked product. 2) Centrifugally cast is defined as a casting technique in which the mold is rotated during solidification of the casting. b) Welded...
API 4F pdf download
API 4F pdf download Specifcation for Drilling and Well Servicing Structures 3.34 structural safety levelssL The classification of a drilling structure application by a purchaser to reflect various degrees of consequence offailure, considering life safety and other issues such as pollution, economic loss, and public concern. 3.35 substructure Structure(s) through which the mast load, hook load, rotary load, andor setback...
API 2D-2 pdf download
API 2D-2 pdf download Training for Ofshore Pedestal- Mounted Crane Riggers, Operators, and Inspectors 4Qualification Training 4.1General Training requirements in this standard include the following:a)qualified crane rigger training (Section 5), b)qualified crane operator training (Section 6). andc)qualified crane inspector training (Section 7). Also included are requirements for qualification in the use of hand signals to complement each of the three...