IEEE Std 1653.1 pdf download

IEEE Std 1653.1 pdf download

IEEE Std 1653.1 pdf download IEEE Standard for Traction Power Rectifer Transformers for Substation Applications up to 1500 V DC Nominal Output cast-coil or cast-resin rectifier transformers: A transformer with windings that are vacuum cast or vacuumimpregnated in epoxy resin and fillers, and cured under a vacuum for purpose of minimizing the probability ofair voids contributing to partial discharges at...

IEEE Std 1653.6 pdf download

IEEE Std 1653.6 pdf download

IEEE Std 1653.6 pdf download IEEE Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities 5.2 NEC requirements ln accordance with NEC Article 90.2(B)(1),installation for railways for generation,transformation,transmission, and distribution of power used exclusively for the operation of rolling stock are not coveredby the NECR[B4].5 5.3 Solid grounding Solidly grounded dc enclosures are connected to earth...

IEEE Std 1660 pdf download

IEEE Std 1660 pdf download

IEEE Std 1660 pdf download IEEE Guide for Application and Management of Stationary Batteries Used in Cycling Service Recent advances in lead-acid technology for cycling applications are grouped under the heading of tadvancedlead-acid'(see 9.2). 5.3.3 Selection criteria for lead-acid batteries in cycling applications The nature of the application should be analyzed to determine if a vented or VRLAbattery is preferred....

IEEE Std 1671.5 pdf download

IEEE Std 1671.5 pdf download

IEEE Std 1671.5 pdf download IEEE Standard for Automatic Test Markup Language (ATML) Test Adapter Description The provision of an extension mechanism is necessary to help ensure the viability of the specification andallow producers and consumers of Test Adapter instance documents to interoperate in those cases wherethere is a requirement to exchange relevant data that is not included in the...

IEEE Std 1673 pdf download

IEEE Std 1673 pdf download

IEEE Std 1673 pdf download IEEE Standard for Requirements for Conduit and Cable Seals for Field Connected Wiring to Equipment in Petroleum and Chemical Industry Exposed to Pressures above Atmospheric (1.5 kPa, 0.22 psi) 1.Overview1.1 Scope This document provides specific requirements for field installed sealing between a pressurized system (stream)containing flammable or combustible process fluids which is connected directly or...

IEEE Std 1679.2 pdf download

IEEE Std 1679.2 pdf download

IEEE Std 1679.2 pdf download IEEE Guide for the Characterization and Evaluation of Sodium-Beta Batteries in Stationary Applications 2. Normative references The following referenced documents are indispensable for the application of this document (i.e., they mustbe understood and used, so each referenced document is cited in text and its relationship to this document isexplained).For dated references, only the edition cited...

IEEE Std 1680.1a pdf download

IEEE Std 1680.1a pdf download

IEEE Std 1680.1a pdf download IEEE Standard for Environmental and Social Responsibility Assessment of Computers and Displays Amendment 1: Editorial and Technical Corrections and Clarifications c)Supplier letter(s) indicating which reduction approach(es) was used to achieve the performance in Tabie 4. Supplier letter(s) shall also include one or more of the following (based on whichreduction approach(es) is usedy: l)lf calculating the...

IEEE Std 1704 pdf download

IEEE Std 1704 pdf download

IEEE Std 1704 pdf download IEEE Standard for Utility Industry End Device Communications Module 2.Normative references The following referenced documents are indispensable for the application of this document(i.e., they mustbe understood and used, so each referenced document is cited in text and its relationship to this document isexplained).For dated references, only the edition cited applies. For undated references, the latest...

IEEE Std 1707 pdf download

IEEE Std 1707 pdf download

IEEE Std 1707 pdf download IEEE Recommended Practice for the Investigation of Events at Nuclear Facilities a) Keeping information that has not been validated from being disseminated during investigation. Care should be taken to keep preliminary findings and information that was not required for thefinal report from being released. b) Ensuring safeguards information is accessible to only those individuals approved...

IEEE Std 1732 pdf download

IEEE Std 1732 pdf download

IEEE Std 1732 pdf download IEEE Recommended Practice for Space Charge Measurements on High- Voltage Direct-Current Extruded Cables for Rated Voltages up to 550 kV The space charge measurement methods recommended for space charge measurements on high-voltagedirect-current (HVDC) extruded cables for rated voltages up to 550 kV are the following: a)The pulsed electro-acoustic(PEA) method b)The thermal step method (TSM) For...