SAE AS 6414A pdf download – Manufacturing Processing Requirements for Molded Elastomer Components Used in Aerospace Applications
SAE AS 6414A pdf download – Manufacturing Processing Requirements for Molded Elastomer Components Used in Aerospace Applications 4.2Blending of Compound 4.2.1.1 lf the practice is observed for blending batches, the compounder/manufacturer shall have a material approval process,which shall include these minimum requirements. These minimum requirements are applicable to allmaterials conforming to AMS7XXX series specifications, user specifications, or print on a...
AS 1012.3.5 pdf download – Methods of testing concrete Method 3.5: Determination of properties related to the consistency of concrete—Slump flow, T 500 and J-ring test
AS 1012.3.5 pdf download – Methods of testing concrete Method 3.5: Determination of properties related to the consistency of concrete—Slump flow, T 500 and J-ring test 5.7J-ring assembly A ring assembly capable of rigidly fixing standard steel reinforcement vertical in a 300 mmdiameter circle, at standard intervals (see Figure 3). Standard steel reinforcement at least100 mm in length and spacing...
AS 1012.8.4 pdf download – Methods of testing concrete Method 8.4: Method for making and curing concrete—Drying shrinkage specimens prepared in the field or in the laboratory
AS 1012.8.4 pdf download – Methods of testing concrete Method 8.4: Method for making and curing concrete—Drying shrinkage specimens prepared in the field or in the laboratory 3.2 Self-compacting concrete (scc) Concrete that is able to flow and consolidate under its own weight, and completely fill theformwork or bore hole even in the presence of dense reinforcement，whilst maintaininghomogeneity and without...
AS 1012.9 pdf download – Methods of testing concrete Method 9: Compressive strength tests— Concrete, mortar and grout specimens
AS 1012.9 pdf download – Methods of testing concrete Method 9: Compressive strength tests— Concrete, mortar and grout specimens 4 ACCEPTANCE OF SPECIMENS4.1Moulded cylinder specimens Moulded cylinder specimens shall be accepted for testing if they have been moulded inaccordance with AS 1012.8.1 and are free from defects likely to affect their strength. Where specimens liable to rejection are tested, all...
AS 1038.16 pdf download – Coal and coke—Analysis and testing Part 16: Assessment and reporting of results
AS 1038.16 pdf download – Coal and coke—Analysis and testing Part 16: Assessment and reporting of results When a result for a QC sample is outside the warning limit (but still inside the control limit, testing may continue, but action should be taken to investigate the cause for the outlying result before results go outside the control limits. Further information...
AS 1085.17 pdf download – Railway track material Part 17: Steel sleepers
AS 1085.17 pdf download – Railway track material Part 17: Steel sleepers 1.1 sCOPE This Standard specifies the performance requirements and gives design and testing methodsfor trough-shaped steel sleepers and their associated components for use in railway track. Italso sets out requirements for the performance of rail-insulating components. NOTES: l Sleepers are generally designed to suit a specific rail profile...
AS 1110.2 pdf download – ISO metric hexagon bolts and screws— Product grades A and B Part 2: Screws
AS 1110.2 pdf download – ISO metric hexagon bolts and screws— Product grades A and B Part 2: Screws 1 Scope This International Standard specifies the characteristics of hexagon head screws with threads from M1,6 up to andincluding M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm,whichever...
AS 1111.1 pdf download – ISO metric hexagon bolts and screws— Product grade C Part 1: Bolts
AS 1111.1 pdf download – ISO metric hexagon bolts and screws— Product grade C Part 1: Bolts 1 Scope This International Standard specifies the characteristics of hexagon head bolts with threads from M5 up to andincluding M64 of product grade C. lf, in special cases, specifications other than those listed in this international Standard are required, they shouldbe selected from...
AS 1112.2 pdf download – ISO metric hexagon nuts Part 2: Style 2—Product grades A and B
AS 1112.2 pdf download – ISO metric hexagon nuts Part 2: Style 2—Product grades A and B 1 Scope This International Standard specifies the characteristics of hexagon nuts, style 2, with threads from MS up to andincluding M36, with product grade A for threads d ≤M16 and product grade B for threads d >M16. lf, in special cases, specifications other...
![AS 1112.3 pdf download – ISO metric hexagon nuts Part 3: Product grade C [ISO title: Hexagon nuts—Product grade C]](https://www.standard-codes.com/wp-content/uploads/2022/07/AS-1112.3-280x210.png "AS 1112.3 pdf download – ISO metric hexagon nuts Part 3: Product grade C [ISO title: Hexagon nuts—Product grade C]")
AS 1112.3 pdf download – ISO metric hexagon nuts Part 3: Product grade C [ISO title: Hexagon nuts—Product grade C]
AS 1112.3 pdf download – ISO metric hexagon nuts Part 3: Product grade C [ISO title: Hexagon nuts—Product grade C] 1 Scope This International Standard specifies the characteristics of hexagon nuts with threads from M5 up to and including M64and product grade C. lf, in special cases, specifications other than those listed in this international Standard are required, they should...