API RP 13K pdf download
API RP 13K pdf download Chemical Analysis of Barite The only HCl insoluble Na and K compounds sometimes found in barite are Na and K feldspars,which aresoluble in HF/H,SO HNO,mixed acids. The difference in Na and K values obtained by these two extractions cangive an estimate of Na and K feldspars in barite. 4.3.5 Calcium(Ca), magnesium (Mg), and iron (Fe)...
API RP 15SA pdf download
API RP 15SA pdf download Integrity Management of Spoolable Reinforced Line Pipe 1Scope This recommended practice is for integrity management of an existingAP115S asset including threat identification,identification of potential failure modes, risk assessment, testing requirements,initial and ongoing inspectionpractices, end-fitting and coupling inspection, potential mitigations, repair, and associated documentation. 2Normative References The following referenced documents are indispensable for the application of...
API RP 17S pdf download
API RP 17S pdf download Recommended Practice for the Design, Testing, and Operation of Subsea Multiphase Flow Meters uesign vrneria 4.1Operational Philosophy The operator shall provide an operational philosophy that includes the following. a) Intended use of the MPFM data and the frequency of data transmission and accumulation.b) The number of wells to be measured with each MPFM. c)Location of...
API RP 51 pdf download
API RP 51 pdf download Onshore Oil and Gas Production Practices for Protection of the Environment 5.3.5 The operator should hold a pre-construction meetingwith the contractor(s) to establish environmental and safetyresponsibilities along with desired objectives of the project.5.3.6Field inspections and lab analysis of soil samplesmay be used to assess soil erosion hazards and slope stability.Properties of soils,length and gradient of...
API RP 74 pdf download
API RP 74 pdf download Recommended Practice for Occupational Safety for Onshore Oil and Gas Production Operation 3.7cellar: Excavation around the wellhead to providespace for items of equipment at the top of the wellbore. 3.8Christmas tree: The valves and fittings assembled atthe top of a completed well to control the flow of hydrocar-bons and other fluids. See API Spec 6A....
API SPEC 5D pdf download
API SPEC 5D pdf download Specification for Drill Pipe 3.1 carload: The quantity of pipe loaded on a rail car forshipment from the pipe-making facilities. 3.2 defect: An imperfection of sufbcient magnitude towarrant rejection of the product based on the stipulations ofthis specibcation. 3.3 elephant hide: The wrinkled outside diameter sur- faces of the pipe caused by the upsetting of...
API SPEC 7HU2 pdf download
API SPEC 7HU2 pdf download Oilfield Hammer Unions 5Materials 5.1General The materials for segment retainer rings, resilient seals, pressure-containing parts, and pressure-retaining partsshall satisfy the requirements below.All metallic materials shall have a wrought microstructure throughout. 5.2Segment Retainer Ring Segment retainer rings shall be made of material meeting the functional requirements of 4.2.4.5.3Resilient Seal The resilient seal shall be made of...
API Spec 8A pdf download
API Spec 8A pdf download Specification for Drilling and Production Hoisting Equipment 4 Material Requirements 4.1 CASTINGS Steel castings used in the manufacture of the main load carrying components of the equipment covered in this specifi- cation shall conform to ASTM A781: Common Requirements for Steel and Alloy Castings for General Industrial Use , and either an individual material specification...
API SPEC 15PX pdf download
API SPEC 15PX pdf download Specifcation for Crosslinked Polyethylene (PEX) Line Pipe 1 Introduction1.1Purpose The purpose of this specification is to provide standards for crosslinked polyethylene (PEX) line pipe suitable foruse in conveying oil, gas,and nonpotable water in underground, aboveground, and reliner applications for theoil- and gas-producing industries. This specification does not address all of the safety concerns associated with...
API Spec 1582 pdf download
API Spec 1582 pdf download SPECIFICATION FOR SIMILARITY FOR API/IP 1581 AVIATION JET FUEL FILTER/SEPARATORS 2.4.2 End-opposed classes (a) Vertical systems having elements in the end- opposed layout populate different classes (Figure 4) when the flow is 1) opposed to and 2) aligned with the attraction of gravity. (b) Systems having a single, non-cylindrical-shaped (or “basket”) separator (Figure 5) populate...